01
CAD comparison
Compare CAD data with a 3D scan. How far does your component deviate from the original design?
First article inspection to PPAP and PPF
Ensure the quality & accuracy of your parts before series production. With our first article inspection (FAI), we help you identify deviations from the nominal condition and minimise errors in series production.
Do you have a specific requirement?Tell us what you need – we will get back to you within 24 hours and advise you in detail on possible solutions and suitable methods.
5µ
0.005 mm measuring accuracy with our most precise devices.
€149
Your cost per single scan as the basis for downstream processes
24h
We offer fast communication & turnaround time.
Size
From a few centimetres up to several metres.
Inspection reports from Scankraft make the difference
A clear basis for decisions
You can see at a glance whether a part is within tolerance, where deviations occur and which areas are critical.
Measurement data instead of gut feeling
3D scanning, CAD comparison and colour-coded deviation maps make visible what often cannot be seen with the naked eye.
Clear to engineering, purchasing and management
Our reports are structured so that design engineering and quality assurance as well as project management and customers can understand the results quickly.
Ideal for PPAP, PPF and quality assurance
The reports can serve as evidence for sample submissions, approvals, complaints, production launches or supplier documentation.
Traceable documentation
Measuring equipment, inspection methods, part data, tolerances, deviations and evaluation are documented thoroughly. This keeps the results verifiable and comparable later on.
Professional presentation of your results
A good inspection report builds trust. It does not just show measured values – it turns technical data into a clear, visual and professional evaluation.
In short: our inspection reports turn complex 3D scan data into an understandable, reliable and professionally documented basis for decisions on quality, approval and further technical steps.
From small businesses to enterprise manufacturers and universities:Hundreds of companies rely on us and our 3D scanning solutions
How your project works
- 01
Project briefing
Send us your project and we will get back to you by phone or e-mail to discuss the details.
- 02
Consulting & quote
Based on your requirements we prepare a quote – and you can count on a fast turnaround.
- 03
Project delivery
We scan your object on site or in-house at our facility in St. Florian/Asten near Linz. You receive the raw 3D scan files, or we create a CAD file or further design drawings.
- 04
Additional services
We also offer optional additional services – feel free to take a look at them below.
Service portfolio
Additional services
We offer an extensive portfolio of additional services that you can book directly or as a follow-up.
02
Object comparison
Before / after analyses following use. Ideal for assessing wear, abrasion and changes to a component.
03
Additive manufacturing
Need your component produced in series? Our additive manufacturing service can help.
04
Colour mapping
Colour-coded, easy-to-read visualisation of surface deviations.
05
Reverse engineering
More about reverse engineering and turning 3D scan data into usable CAD data.
06
Technical drawings
Standard-compliant technical drawings based on 3D scan data, CAD models or existing components.
Your contact person:Dipl.-Ing. Lukas Patri
Surveying engineer at Scankraft GmbH
More than a decade of experience in metrology, industrial surveying, laser scanning and more.
We have measured and digitised a wide range of objects – components, entire machines, plants, power stations, people, buildings and industrial facilities with all kinds of surface textures & materials. We would be glad to help you with your project, too!
Frequently asked questions
If our FAQ does not answer your question, simply send us an inquiry, an e-mail or give us a call – we are happy to help.
How is sensitive data handled?
We treat our customers' data as strictly confidential – all data is hosted locally on our own backed-up systems (not in the cloud).
For data transfer, just tell us the method you prefer (e.g. your company's own cloud solution).
We are of course happy to sign an NDA if you wish.
Latest videos
We cover metrology and reverse engineering, and show our 3D scanners live in action on our YouTube channel.
FreeScan Trio: Shining 3D's 3-in-1 scanning solution
Introducing Shining 3D's 3-in-1 scanning solution for industrial applications, quality assurance and metrology.
Scankraft Engineering
Planning a specific project?
We review the application, accuracy and budget together with you.
Your contactPhilip FeilhaberTechnical Sales Manager
Lukas PatriTechnology & Services
Trusted by industry and research
Organizations that rely on Scankraft metrology.
Over 25 years of expertise in 3D & metrology.
Learn more about our company.Get in touch
We know our 3D scanners and software inside out and offer our expertise as a service, too. Put our years of experience to work for your company or project.
- Contact:
- Philip Feilhaber
- Phone hours
- · Mon–Thu 08:00–17:00 · Fri 08:00–14:00
- Phone:
- +43 7224 209020100
- Email:
- office@scankraft.com
- Scan offices:
- St. Florian (AT), Stuttgart (DE), Braunschweig (DE)